Sovol SV07 – getting to know & improvements

I got myself a new 3d printer and I decided to get the Sovol SV07. I read some goor reviews about its print-quality and the need to fine-tune some aspects myself did not deterr met at all.

On this page, I’ll collect some basic information (specs, mods, possible improvements), that I collected as a new user of the SV07 and which might be interesting for other SV07 users.

Specs

The specs are form the official SV07 website, with details added by myself.

• SSH access
  • user: mks

    ssh mks@hostname_or_ip

  • password: makerbase
• Software
  • Moonraker
  • Fluidd
• Printer dimension: 460mm x 457mm x 625 mm( including filament holder）
  • feet area: 32cm x 33cm
  • height including role of filament: 70cm
• Print size: 220mm*220mm*250mm
• Print mode: U disk, Type C connection, Wifi Connection
• Max printing speed: 500mm/s
• Recommend printing speed: ≤250mm/s
• Printing accuracy: +-0.001mm
• Nozzle diameter: 0.4mm （Replaceable）
• Nozzle temp: ≤300℃
• Hotbed Temp: ≤100℃
• Diameter of filament: 1.75mm
• File format support: G-Code
• Voltage: input 115/230 V 50/60HZ output 24V
• Power supply: Meanwell 350W/ 24V
  • Power supply fan: 6015, 12V, 2 wires, CCHV CHA6012RM-15D
• Fan on the bottom of the printer: 4010, 24V, 2 wires EFC-04D24L
• SBC
  • Makerbase MKS KLIPAD50 V1.0
• MCU
  • STM32 with TMC2209 driver

Improvements

1. set timezone
   • connect via ssh

   • timedatectl list-timezones

   • sudo timedatectl set-timezone <the timezone, you want to set>

2. add a webcam
   • mounting with a self-designed and printed bracket
   • setup software
3. enable Telegram notifications
   • using moonraker-telegram-bot